Roller pressing and rubbing release material

1、Non ionic modified polyether surfactant, fast wiping rollers without residue, safety and environmental protection, non-combustible;
2, Direct use, with non-woven continuous wipe roll.

PVDF FL2300/FL2032

1、FL2300 is suitable for sodium electrode and high nickel system copolymerization PVDF binder; solve the problem of poor slurry stability and adhesion caused by residual alkali high positive electrode material;
2、FL2032 is suitable for power, energy storage and other types of emulsion PVDF;
3、Developed in cooperation with Vonorin.

High temperature insulating edge coating adhesive NP75

1, high temperature insulation modified imide ring (-CO-NR-CO-) polymers, instead of ceramic coated edge, reduce the thickness of the coated edge, to solve the problem of poor ceramic ductility / difficult to stretch / laser cutting of molten beads;
2、Direct use, no need to make glue homogenization.

Auxiliary materials

Positive and negative electrode softening, wetting, liquid preservation and other materials; lithium, sodium electric wetting and leveling materials, anti-gel, lithium non-fluorine bonding agent and other materials.

Water-based wetting material R001

1、Non-ionic modified polyether surfactant, improves the wetting of anode graphite in aqueous slurry and solves the appearance defects such as bubble shrinkage of pole piece;
2、Solid content ≥ 97% liquid.

Flexible anti-cracking material Z816

1、Modified polyether material and 13butylene glycol synergize to increase flexibility and prevent cracking of pole piece;
2、Solid content≥99%.

Super levitation material Z100

1、Cross-linking structure improvement of polyacrylic acid 1/3 of the amount of CMC, fast dissolution to realize dry mixing, improve the shape of the pole piece, improve the performance of the low-temperature multiplication of the electric core;
2、White powder solid.

Aqueous homogenizing and dispersing material A001

1、Polyacrylic acid material containing hydrophobic/hydrophilic groups;
2, solids 40%, solvent deionized water.

Cost-effective dispersion material F3135

1、Phospholipid compound;
2, solid 50% gel solution.

High-performance dispersion material F710

1、The main chain of F710 is polyethylene polypropylene block polymer, and the anchoring group is modified carboxylic acid group;
2、Solid 30% glue.